With the Galaxy S6, Samsung has made a few security changes to help protect users from hackers.
But what if you have one of the phones running the S7 Edge?
There are two ways to unlock the phone, one through the fingerprint scanner and the other through a security door.
The security doors are located on the side of the phone and are hidden by a metal plate that can be seen through the glass.
Security doors are one of a few ways to lock your phone in a way that won’t be easily spotted by a hacker.
This can be useful if you’re in a hurry and want to unlock a phone in the same way you would with an unlock code.
The Security Door Method One of the security doors on the Galaxy Edge.
If you’re going to be unlocking your phone with a security key, you need to be careful.
If the security door isn’t on the same side of your phone as the fingerprint reader, it can get damaged.
That’s why it’s important to ensure that it is the same as the one on the back of your device.
To open the security key for the fingerprint sensor, pull out the fingerprint pad from the side panel.
Use a small flat-blade screwdriver to hold the fingerprint off the side.
When the fingerprint is removed, pull the back cover back to reveal the fingerprint key.
Push the fingerprint into the security area, which is on the top.
Use the same screwdriver, and the fingerprint will be pushed back into the fingerprint area.
This is the secure area.
The other secure area is where the unlock code is stored.
This key is hidden inside the plastic keypad.
Once you’ve used the fingerprint unlock code, pull it out of the keypad, which will be visible through the security lens.
This part of the process is the most difficult, so it’s best to take your time.
The first thing you’ll need to do is turn off the device.
Press the power button to wake the device up, then hold it down until you see the notification light.
Then, you’ll be prompted to enable security lock mode.
If security lock is enabled, your device will turn off automatically and lock itself.
After unlocking the device, you will be given a passcode.
Press this passcode when you need the passcode to unlock or unlock the device in the future.
If this is your first time unlocking your Galaxy S device, it will prompt you to select a passphrase.
Once the passphrase is entered, the security unlock will start.
This process will take about 30 seconds.
Once it’s complete, you can unlock the Galaxy with the passcodes provided.
When you’re done unlocking your device, the device will reboot.
This will take some time, so be patient.
Once your device is locked, press the power again to power off the phone.
This could take a few minutes to complete.
Once unlocked, you should now be able to log in to the phone as normal.
To do this, hold the power key down for a few seconds and the phone will reboot automatically.
This should take about 10 to 15 minutes.
To check that the phone is unlocked, use the fingerprint lock code.
This unlocks the phone to the owner’s fingerprint, which should be visible from the back.
Once this is complete, the phone should reboot automatically once again.
The Samsung Galaxy SE/Galaxy S7/Galamos7 Edge are now locked.